Overwriting Oad; Conversion Of Call Numbers - TELES VoIP Box DSL Series Reference Manual

6 Signaling and routing features
This example presents an alternative, in which the routing file
is searched through again after conversion of the call number
to determine the route for the prefix 01555. Please bear in
mind that you can configure a maximum of 5000 mapping en-
tries.
Example 6.10

Conversion of call numbers

...
MapAll015550123451=$Reception
MapAll015550123452=$Reception
MapAll015550123453=$Reception
MapAllReception=015559876543
6.5

Overwriting OAD

In some cases where the OAD is not transmitted or shall for
other reasons be overwritten, the following parameter can be
used to send another OAD:
Restrict<port>=<OAD to be sent> 15 or
Restrict<port><original OAD>=<OAD to be sent> 15
In the following example, the OAD 456 is displayed to the
called person for calls that have been received via port 10.
Example 6.11

Overwriting OAD

Restrict10=456 15
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 122