Sony Handycam HDR-HC1E Operating Manual page 92

Troubleshooting (Continued)
• You cannot use [CINEMA EFECT] together with:
– When the exposure is anything other than the automatic mode
– Other than 0 in [AE SHIFT]
– [PICT. EFFECT]
– When [
– [PROGRAM AE]
– [SPOT METER]
– When [SHUTTR SPEED] is set to [MANUAL]
You cannot use [PICT. EFFECT] .
• You cannot use [PICT. EFFECT] together with:
– [COLOR BAR]
– [OLD MOVIE] or [CINEMA EFECT] of [D. EFFECT]
• [PICT. EFFECT] cannot be set to [SKINTONE] while using the BACK LIGHT function.
You cannot use [SHOT TRANS].
• You cannot use [SHOT TRANS] together with:
– NightShot
– [COLOR BAR]
Dubbing/Editing/Connecting to other devices
Pictures from connected devices are not displayed on the LCD screen or the
viewfinder.
• Set [DISP OUTPUT] to [LCD PANEL] (p. 58).
• You cannot input a signal to your camcorder if you press DISPLAY/BATT INFO while
[DISP OUTPUT] is set to [V-OUT/PANEL] (p. 58).
Pictures from connected devices cannot be zoomed.
• You cannot zoom the pictures from connected devices on your camcorder (p. 26).
Time code and other information appear on the display of the connected
device.
• Set [DISP OUTPUT] to [LCD PANEL] while connected with an A/V connecting cable (p.
58).
You cannot dub correctly using the A/V connecting cable.
• You cannot input externally from a device connected with the A/V connecting cable.
• The A/V connecting cable is not connected properly.
Make sure that the A/V connecting cable is connected to the input jack of another device for
dubbing a picture from your camcorder.
92
WIDE SELECT] of [DV SET] is set to [4:3]