Marking Images On The "Memory Stick Duo" With Specific Information (Image Protection/Print Mark); Preventing Accidental Erasure; Image Protection - Sony Handycam HDR-HC1E Operating Manual

Marking images on the
"Memory Stick Duo" with
specific information
(Image protection/Print mark)
When you are using a "Memory Stick
Duo" with the write-protect tab, make sure
the write-protect tab on the "Memory Stick
Duo" is not set to the write-protect position
(p. 102).

Preventing accidental erasure

(Image protection)

You can select and mark images to prevent
accidental erasure.
1
Slide the POWER switch down to
turn on the PLAY/EDIT lamp.
2
Touch
[PROTECT].

3
Touch the image that you want to
protect.
PROTECT
101–0002
2/ 10
4
Touch

• To cancel image protection, touch the image
again to cancel image protection in step 3.
68
 

appears.
OK
101
[END].
Selecting still images for
printing (Print mark)
The DPOF (Digital Print Order Format)
standard is used to select images for
printing on your camcorder.
By marking images that you want to print
out, you do not need to reselect them when
you print them out. (You cannot specify the
number of printouts.)
1
Slide the POWER switch down to
turn on the PLAY/EDIT lamp.
2
Touch

MARK].
3
Touch the image that you want to
print out later.
PRINT MARK
101–0002
2/ 10
101
4
Touch [END].

• To cancel Print mark, touch the image again to
cancel Print mark in step 3.
• Do not mark images on your camcorder if the
"Memory Stick Duo" already has some images
with the Print mark put on using other devices.
This may change the information of the images
with the Print mark put on using the other
device.
[PRINT
 
appears.
OK