Sony Handycam HDR-HC1E Operating Manual page 58

STANDARD SET menu (Continued)
GUIDEFRAME
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON]. The
frame is not recorded. Press DISPLAY/
BATT INFO to make the frame disappear.
• Pointing the subject at the cross point of the
guide frame makes a balanced composition.
COLOR BAR
You can display the color bar or record it
on the tape by setting [COLOR BAR] to
[ON]. It is convenient to adjust the color on
the monitor connected.
DATA CODE
During playback, displays the information
recorded automatically (data code) during
recording.
 OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
60min

SteadyShot off*
 Exposure*
 White balance*
 Gain*
 Shutter speed
 Aperture value
* Appears only during tape playback.
• The exposure adjustment value (0EV), a shutter
speed, and the aperture value appear when still
images on a "Memory Stick Duo" are played
58
0:00:00:00
1
2
AUTO
3
100 AWB
F1. 8 9dB
6 5 4
back.
• appears for a picture recorded using a flash.
• In the DATE/TIME data display, the date and
time are displayed in the same area. If you
record a picture without setting the clock, [-- --
----] and [--:--:--] will appear.
REMAINING
 AUTO
Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.
• When you set the POWER switch to PLAY/
EDIT or CAMERA-TAPE with a cassette
inserted.
• When you touch
ON
Always displays the remaining tape
indicator.
REMOTE CTRL (Remote control)
The default setting is [ON], allowing you to
use the Remote Commander (p. 32).
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
REC LAMP (Recording lamp)
The camera recording lamp will not light
up during recording when you set this to
[OFF]. (The default setting is [ON].)
BEEP
 ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody.
DISP OUTPUT
 LCD PANEL
(Play/Pause).