Draytek VigorAP 903 User Manual page 123

You can set up to 15 schedules. To add a schedule:
1. Check the box of Enable Schedule.
2. Click the Add button to open the following web page.
Available settings are explained as follows:
Item
Enable
Start Date
Start Time
Duration Time
End Time
Action
WiFi(2.4GHz)/
WiFi(5GHz)
Acts
Add – Such button is available when Enable Schedule is checked. It
allows to add a new schedule profile.
Delete – Check the index box of the schedule profile and click such button
to remove the profile.
Description
Check to enable such schedule profile.
Specify the starting date of the schedule.
Specify the starting time of the schedule.
Specify the duration (or period) for the schedule.
Specify the ending time of the schedule.
Specify which action should apply the schedule.
When Wi-Fi UP or Wi-Fi DOWN is selected as Action, you can check the
Radio or SSID 2~4 boxes (2.4GHz and 5GHz respectively) to setup the
network based on the schedule profile.
Note: When Radio is selected, SSID2, SSID3 and SSID4 are not available
for choosing, vice versa. Moreover, SSID2, SSID3, and SSID4 are not
available for choosing if they are not enabled.
Specify how often the schedule will be applied.
Once -The schedule will be applied just once
Routine -Specify which days in one week should perform the schedule.
117