IV-2 Applications
Below shows the menu items for Applications.
IV-2-1 Schedule
The VigorAP has a built-in clock which can update itself manually or automatically by means of Network
Time Protocols (NTP). As a result, you can not only schedule the AP to dialup to the Internet at a specified
time, but also restrict Internet access to certain hours so that users can connect to the Internet only during
certain hours, say, business hours. The schedule is also applicable to other functions.
You have to set your time before set schedule. In System Maintenance>> Time and Date menu,
press Inquire Time button to set the VigorAP's clock to current time of your PC. The clock will reset once
if you power down or reset the AP. There is another way to set up time. You can inquiry an NTP server (a
time server) on the Internet to synchronize the AP's clock. This method can only be applied when the WAN
connection has been built up.
Available settings are explained as follows:
Available settings are explained as follows:
Item
Schedule
Schedule
Configuration
Description
Enable Schedule - Check it to enable the function of schedule
configuration.
Index – Display the sort number of the schedule profile.
Setting – Display the summary of the schedule profile.
Action – Display the action adopted by the schedule profile.
Status – Display if the profile is enabled (V) or not (X).
116
Need help?
Do you have a question about the VigorAP 903 and is the answer not in the manual?