Positioning For Use - Tatu Marchesan RC2 1300 Instruction Manual

PREP PREP
PREP ARA PREP PREP
The RC² 1300, RC² 1500, RC² 1700 cutters can be operated in a central or lateral
position in relation to the tractor. If it is necessary to alter the position, follow the
instructions in the diagram.
- Loosen the screws which secure the crossarm brace (A). It is not necessary to
remove them.
- Disconnect the drawbar from the chassis, removing the screws, flat washers,
spring washers and nuts.
B
Detail
ARA ARA TION FOR USE TION FOR USE
ARA ARA TION FOR USE TION FOR USE TION FOR USE

Positioning for Use

A
A
15
A