Fitting The Vented Oil Gauges - Tatu Marchesan RC2 1300 Instruction Manual

PREP PREP
PREP PREP ARA PREP
Remove the rear stopper from the multipliers and insert the vented oil gauge
(A).
Check the oil level as soon as the gauge has been inserted into the hole, without
screwing it in.
The oil level should be adjusted according to the indicator markings, when the
cutter is on level ground.
Use only SAE 90 oil.
ARA ARA TION FOR USE TION FOR USE
ARA TION FOR USE ARA TION FOR USE TION FOR USE

Fitting the Vented Oil Gauges

14
A
Maximum
Minimum