Zone Detection - Kodak CHERISH C120 User Manual

10. ZONE DETECTION

WELCOME
10.1 Zone Detection Set up
If you want to monitor only specific areas, you can do this up by setting zones on the
app. The app will notify you when there is motion detected in the zone.
1. Click on
" " that is
located at
the right
bottom
corner
Page | 56
2. Switch on
Motion
Detection ,click
Define Zone to
Detect Motion.
3. Click on +
which is
located at
the middle of
your screen.
4. Use your finger to draw
the zone, Press "
when finished and click
on Update Zone to
Camera to save
KODAK Smart Home Introduction
"