Step 6: Setting the date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [CLOCK SET]
screen appears every time you turn on your
camcorder or change the POWER switch
position.
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again (p. 68).
Skip to step 4 when you set the clock for
the first time.
1
Touch
MANUAL SET
PROGRAM AE
P EFFECT
AUTO SHTR
2
Select
/
SETUP MENU
CLOCK SET
DEMO MODE
16
POWER switch
t [MENU].
EXEC
RET.
(SETUP MENU) with
, then touch [EXEC].
--:--:--
LANGUAGE
RET.
EXEC
3
Select [CLOCK SET] with
, then touch [EXEC].
CLOCK SET
Y
M
2 0 0 7
4
Set [Y] (year) with
then touch
You can set any year up to the year
2079.
CLOCK SET
Y
M
2 0 0 7
5
Set [M] (month), then touch
and repeat for [D] (day), [H] (hour)
and [M] (minute).
The clock starts.
• The date and time are not displayed while
recording, but they are automatically recorded
on the tape, and can be displayed during
playback (see page 35 for [DATA CODE]
(During Easy Handycam operation, you can set
only [DATE/TIME])).
D
H
M
0 : 0 0
1
1
OK
/
,
.
D
H
M
0 : 0 0
1
1
OK
/