Getting Started; Step 1: Charging The Battery Pack - Sony HANDYCAM CX160 Operating Manual

Getting started

Step 1: Charging the battery pack

Battery pack
CHG (charge) lamp
You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your
camcorder.

Notes
You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder.

1
Turn off your camcorder by closing the LCD screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
Align the  mark on the DC plug
with that on the DC IN jack.
DC IN jack
AC Adaptor
To the wall outlet
DC plug
Power cord
(Mains lead)
(wall socket)
US
1