Sony HANDYCAM CX160 Operating Manual page 53

A/V Remote Connector
Input
S VIDEO
VIDEO
(White)
AUDIO
(Yellow)
Signal flow
 A/V connecting cable (supplied)
 A/V connecting cable with S VIDEO
(sold separately)
By using this cable, higher quality
images can be produced than with an
A/V connecting cable. Connect the white
and red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDEO
cable. If you connect the S VIDEO plug
only, you will hear no sound. The yellow
plug (video) connection is not necessary.
1
Insert the recording media in the
recording device.
If your recording device has an input

selector, set it to the input mode.
(Yellow)
(Red)
2
Connect your camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable  (supplied) or an A/V
connecting cable with S VIDEO
 (sold separately).
Connect your camcorder to the input jacks

of the recording device.
3
Start playback on your
camcorder, and record it on the
recording device.
Refer to the instruction manuals supplied

with your recording device for details.
4
When dubbing is finished, stop
the recording device, and then
your camcorder.

Notes
Since copying is performed via analog data

transfer, the image quality may deteriorate.
You cannot copy images to recorders connected

with an HDMI cable.
To copy date/time information and camera

(MENU)  [Setup] 
data, touch
(Playback Settings)]  [Data Code]  a
[
desired setting 
When the screen size of display devices (TV,

etc.) is 4:3, touch
 [ (Connection)]  [TV Type]  [4:3]

.
When you connect a monaural device, connect

the yellow plug of the A/V connecting cable
to the video input jack, and the white (left
channel) or the red (right channel) plug to the
audio input jack on the device.
.
(MENU)  [Setup]
US