Table of Contents
Advertisement
Testing the viewfinder
1
Adjust the position of the viewfinder.
2
Check that the color bars are displayed in the viewfinder, and adjust
the BRIGHT, CONTRAST, and PEAKING controls to give the best
color bar display.
3
Check each of the following operations.
(1) Set the DISPLAY switch to MENU and check that the setup
menu is displayed on the viewfinder screen.
(2) Turn the MIC/MENU knob and check that the setup menu page
changes to the next page.
(3) Push the MIC/MENU knob and check that settings of each item
of the selected page are displayed.
(4) Turn the MIC/MENU knob and check that the arrow ( )
moves within the page.
(5) Push the MIC/MENU knob and check that the arrow ( )
changes to a question mark (?).
(6) Turn the MIC/MENU knob and check that the setting of the
selected item or the ON/OFF indicator changes.
4
Set the OUTPUT/DCC switch to CAM, and change the FILTER
selector position in the sequence of 1, 2, 3, 4.
Check that the FILTER indicator on the viewfinder screen displays
the correct numbers.
Chapter 6 Maintenance
6
(Continued)
6-3
Advertisement
Table of Contents
