Sony F900H Operation Manual page 106

• OPERATION menu:
This menu contains items for changing settings according to conditions
related to the subject when a normal cameraman is operating the
camcorder. This menu is normally displayed when the DISPLAY switch
is changed to MENU.
For detailed information on adjustments and setups using this OPERATION menu,
see "4-8 Setup Using the OPERATION Menu" on page 4-47.
• PAINT menu
4
This menu contains items for making detailed image adjustments while
using a waveform monitor to monitor the waveforms output by the
camera. Usually, the support of a video engineer is required to use this
menu. Although you can also use an external remote control panel or
master setup unit to set the items on this menu, this menu is effective
when using the camcorder by itself outdoors. This menu allows you to
perform almost the same settings as those of the PAINT menu of the
MSU-700A/750 Master Setup Unit (not supplied).
• MAINTENANCE menu
This menu contains items for performing camera maintenance operations
such as changing the system or infrequently used paint items. This menu
allows you to perform almost the same settings as those of the
MAINTENANCE menu of the MSU-700A/750 Master Setup Unit (not
supplied).
• FILE menu
This menu is used for performing file operations such as writing the
reference file.
• DIAGNOSIS menu
This menu enables you to confirm the VTR status or a failed circuit
board.
4-30
Chapter 4 Adjustments and Settings for Recording