Table of Contents
Advertisement
6
Mount the microphone into the cradle suspension.
7
Connect the microphone cable to the AUDIO IN connector for
channel 1 or 2. Set the corresponding AUDIO IN switch to REAR.
Set the LINE/MIC/+48V ON switch to +48V ON or MIC in
accordance with the type of the microphone power supply.
Note
When you connect a microphone to the AUDIO IN connector for
channel 1 and 2, set the appropriate LINE/MIC/+48V ON switch to
MIC.
Microphone
Chapter 5 Setting Up the Camcorder
5
5-21
Advertisement
Table of Contents
