Setting The Clock; Turning On/Off The Radio; Listening To Radio - Bush PR-50 Instruction Manual

SETTING THE CLOCK

After inserting the batteries, the hour and minute digits "0:00" will flash on the
display. In this standby state you can set the clock.
1. Repeatedly press
time.
2. Press to confirm.
 The hour and minute digits will stop flashing.
 " : " will flash.
To reset the clock, in standby state press and hold
flashes and then repeat the steps above to set the clock time.

TURNING ON/OFF THE RADIO

1. Press to turn on the radio.
 The display will briefly show the raido frequency and then return to the
clock time.
2. To turn off the radio, press and hold

LISTENING TO RADIO

1. In power on state, repeatedly press
frequency AM or FM.
 The corresponding band symbol "FM" or "AM" will appear on the
display.
2. Adjust the volume by repeatedly pressing the volume up and down
buttons.
The diplay will show the volume level

3. Repeatedly press the tuning up and down buttons to tune into the
desired station.
Press and hold the tuning up or down button for auto forward or

backward radio station searching.
/ to set the clock
for about 2 seconds.
until the clock time
to select the radio
4