Advertisement
How to Charge Your Battery
1. With the charger unplugged from the mains, connect the
clips to the battery as detailed below
For batteries inside the vehicle
- Attach the red (+) battery clip to the red (+)
terminal on the battery
- Attach the black (-) battery clip to a bolt or bracket on the
engine block, away from the battery and fuel lines
For batteries outside the vehicle
- Attach the red (+) battery clip to the red (+)
terminal on the battery
- Attach the black (-) battery clip to the black (-)
terminal on the battery
Advanced Smart Charger
Features
1
2
3
4
5
6
7
8
9
10
Charge Status Led
Green Flashing =
Green Solid =
Charging
Fully Charged
1 Hook
2 Battery
type mode
3 Charging
Mode
4 Charge
Status LED
5 Winter Charge
6 Normal Charge
Lithium
7 Maintenance
Charge
8 Standard
Battery Testing
9 START/STOP
battery testing
10 Lithium Mode
Maintenance Charge
Lithium
Normal Charge
WInter Charge
Lithium
Standard Battery
START/STOP
Lithium
Lithium
Lithium Mode
Lithium
Lithium
Red Solid=
Polarity Check
(Incorrect Battery Connection)
If the battery charger shows as solid red, the clips have
connected to the wrong terminals and need to be
swapped over.
2. For the smart charger plus select the "start/stop" setting if
your vehicle uses this technology.
3. With a correct connection a solid green light will show.
Plug the battery charger into the mains and the charger
will automatically select the best program to use.
4. To select a different charging mode, press the charging
mode button until the desired mode is selected.
Advertisement
