Fire Pump surging in the lines. (Please note that if the Model 50B-4KG-1 is to be used on a continuous duty basis to maintain fire-system pressure, suitable back pressure must be provided on the valve to prevent cavitation damage.
300 x 150 pressure exceeds spring setting. This valve shall be UL Listed and Factory Mutual approved. It shall be the MODEL 50B-4KG-1 (globe) or Model 2050B-4KG-1 (angle) Pressure Relief Valve as manufactured by Cla-Val Newport Beach, California.
(usually atmosphere) the line pressure With the use of a Cla-Val Co. "modulat- chamber the valve closes drip-tight. (5 psi Min.) at the valve inlet opens the ing control," which reacts to line pres- valve.
When flow is “up-and-over the seat,” it is in “normal” flow and the valve will fail in the open position. When flow is “over- 2. Cla-Val Model X101 Valve Position Indicator. This pro- the seat-and down,” it is in “reverse” flow and the valve will fail in the closed position.
Page 9
Tight Sealing Check (#3) 6. If the valve has a Cla-Val Co. X101 Position Indicator, observe the indicator to see that the valve opens wide. Mark the point of 13. Test for seat leakage after completing checks #1 & #2 (Steps maximum opening.
VALVE STEM THREAD SIZE Valve Size Thread Size (UNF Internal) Preventative Maintenance 1 1/4" —2 1/2" 10—32 The Cla-Val Co. Model 100-01 Hytrol Valve requires no lubrication 3"—4" 1/4—28 or packing and a minimum of maintenance. However, a periodic 6"—14" 3/8—24 inspection schedule should be established to determine how the 16"...
Inspection of Parts Lime Deposits After the valve has been disassembled, each part should be One of the easiest ways to remove lime deposits from the valve examined carefully for signs of wear, corrosion, or any other stem or other metal parts is to dip them in a 5-percent muriatic abnormal condition.
Page 14
ADDED CRL-13, CRL-5A, CRA, CRA-10A, CHANGED SPRING RANGES TO MATCH CURRENT CONTROLS. *This drawing is the property of CLA-VAL Co. and same and copies made therof, if any, shall be returned to it upon demand. Delivery and disclosure hereof are made soley upon condition that the same shall not be used, copied ore reproduced, nor shall the subject here of be disclosed in any manner to anyone for any purpose, except as herein authorized, without prior approval of CLA-VAL Co.
Page 20
This warranty shall not apply if the product has been altered or accepted are subject to adjustment to the Seller’s price in effect at repaired by others, and Cla-Val. shall make no allowance or the time of shipment. Prices do not include sales, excise, munici- pal, state or any other Government taxes.
Need help?
Do you have a question about the 50B-4KG-1 and is the answer not in the manual?
Questions and answers