Battery Life; To Remove The Battery Pack - Sony DSR-200A Operating Instructions Manual

Sony digital camcorder operating instructions dsr-200a
Hide thumbs Also See for DSR-200A:
Table of Contents

Advertisement

Charging and installing the battery pack

Battery life

Battery
pack
NP-F950
NP-F750
NP-F950 (x3)
Numbers in parentheses indicate the time when you use a normally charged battery.
Battery life will be shorter if you use the digital camcorder in a cold environment.
1) Approximate continuous recording time indoors.
2) Approximate minutes when recording while you repeat recording start/stop,
zooming and turning the power on/off. The actual battery life may be shorter.
3) When using the NPA-10000 battery adaptor.

To remove the battery pack

Slide the battery pack in the direction of the arrow.
Notes on charging the battery pack
•The CHARGE lamp will remain lit for a while even if the battery pack is removed and
the power cord is unplugged after charging the battery pack. This is normal.
•If the CHARGE lamp does not light, disconnect the power cord. After about one
minute, reconnect the power cord again.
•When operating the digital camcorder using the AC power adapter, you cannot
charge the battery pack.
•When a fully charged battery pack is installed, the CHARGE lamp will light once,
then go out.
22
Continuous
1)
recording time
150 (135)
95 (85)
3)
450 (405)
Typical recording
2)
time
80 (70)
50 (45)
240 (210)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents