Factory Reset; Faq And Troubleshooting - Miccus Swivel Jack RTX MSMSH-50 User Manual

Factory Reset

If for any reason the Swivel Jack RTX is not working as expected, follow
these steps to do a factory reset to clear the memory and restore
default settings.
1. With the Swivel Jack RTX powered off, press and hold the
multi-function button for roughly 15 seconds until the unit powers
on and then powers off again (no LED activity for 5 seconds).
2. Once powered off, memory has been cleared and the unit has
returned to its factory default settings.
3. Double press the button to power back on and the Swivel Jack RTX
will automatically enter pairing mode.

FAQ and Troubleshooting

PROBLEM
Miccus Swivel
Jack RTX does
not turn on
Audio breaks
up or wireless
range is too
low
No sound/
audio output
Can't control
volume
1. C hecktheUSBpowerconnection.
2. With portable use, check to make sure the Swivel
Jack RTX is fully charged.
3. M akesuretopressandholdthepowerbuttonfor
3 seconds.
1. Move the Miccus Swivel Jack RTX away from
other2.4GHzequipmentsuchasWi-firouters
and microwaves, and make sure the Swivel Jack is
operatinglineofsitewithotherBluetooth
devices.
1. Check to make sure the Swivel Jack is firmly
seated into the headphone jack or auxiliary input.
2. Press play on your music source.
3. Check the level on your music source to make
sure it is set to a listenable volume.
1. By design the Swivel Jack RTX is a passive
transmitterorreceiverandhasnovolume
control. Adjust the volume level at the audio
source connected to the Swivel Jack RTX.
SOLUTION
11