Factory Reset; Faq And Troubleshooting - Miccus Home RTX 2.0 User Manual

LIGHT
LED
LED
LED blinks blue rapidly
LED solid green
CH 1 and CH 2 blue LED off,
3.5mm or optical green
LED blue stays on
LED blue stays on with 2
blinks every 5 seconds
OpticalPassThrough
The Miccus Home RTX 2.0 features digital audio pass through. Digital
audio coming into the Home RTX 2.0 via the "Optical In" will also pass
through to the "Optical output. " Most televisions and stereo systems
feature only one optical audio output. The Home RTX 2.0 allows the user
to receive an optical audio feed from a television or stereo system and
transmit/stream that audio feed to two pair of headphones or Bluetooth
speakers simultaneously. The Home RTX 2.0 can then pass that same
audio onto a soundbar, stereo receiver, or another Miccus Home RTX 2.0
without the use of an optical audio splitter. Use the same audio source
and daisy chain two or more Miccus® Home RTX 2.0's together; double
or even triple the number of low latency audio streams available for use.

Factory Reset

If for any reason the Home RTX 2.0 is not working as expected, clear
the memory and restore default settings to the Home RTX 2.0.
• Ensure the Home RTX 2.0 is connected to USB power.
FUNCTION
Blue (CH1 & CH2)
Green (3.5mm & Optical)
Pairing mode
Optical or 3.5mm Connected
Standby Mode (no pairing detected)
Connected with either the SBC or
aptX codecs
Connected with the aptX Low
Latency codec
9
• Press and hold the multi-function button for roughly 10 seconds
until the unit powers off.
• Once powered off, memory has been cleared and the unit has
returned to its factory default settings.
• When powered back on, the Home RTX 2.0 will enter pairing
mode directly.
FAQandTroubleshooting
PROBLEM SOLUTION
Miccus Home RTX 2.0 1.
does not turn on
2.
Audio breaks up or 1.
wireless range is
too low
2.
No sound/audio 1.
output
2.
3.
Can't control Volume 1.
Check the USB power connection
Make sure to press and hold the
power button for 5 seconds.
Make sure the antenna is attached
securely and positioned correctly.
Move the Miccus Home RTX 2.0 away
from other 2.4 GHz equipment such
as Wi-Fi routers and microwaves.
Check the cables to make sure they
are connected to the correct jacks.
Press play on your music source.
Check to make sure your volume is
set to a listenable level.
By design the Miccus Home RTX 2.0 is
a passive transmitter or receiver and
has no volume control. User volume
level must be adjusted via the input
and/or output sources connected to
the Miccus Home RTX 2.0.
10