Miccus Swivel Jack RTX MSMSH-50 User Manual page 16

PROBLEM
Can't dual link
pair my
devices to the
Miccus Swivel
Jack RTX
Care and Maintenance
To keep from damaging the Miccus® Swivel Jack RTX's internal
•
circuit, avoid exposure to liquid, moisture and humidity.
Extreme temperatures can shorten the life of electronic devices.
•
Don't use abrasive cleaning solvents to clean the Miccus® Swivel
•
Jack RTX.
Do not dispose of the Miccus® Swivel Jack RTX in fire as it will
•
result in an explosion.
Avoid contact with sharp objects. They may scratch or damage or
•
puncture the Miccus® Swivel Jack RTX.
Do not drop: dropping the Miccus® Swivel Jack RTX can damage
•
the internal circuitry.
When the Dual-Link pairing procedure won't
connect to a second device,
1. After pairing the first device, then power down
the Swivel Jack RTX and your second device.
2. Next, power on both receiving or transmitting
devices again.
3. Then place the Swivel Jack RTX into pairing
mode again.
4. Wait up to 30 seconds for both devices to
reconnect.
5. When connected, both Blue LED lights will light
solid or will blink every 5 seconds if using aptX
Low Latency.
6. If this doesn't fix your issue, perform a factory
reset on the Swivel Jack RTX and your other
Bluetooth device.
SOLUTION
13