USING THE COOKT()P
The surface burnerswill feature either matchlit ignitionor
To light surface burner with Piezo ignition:
Piezo pilotlessignition.Be sureall controlknobs are in the
1. Place a pan on the burner grate.
OFF position beforesupplyinggastothe appliance. B esure
gas supplyto appliance is onbeforelightingburner.
2. Pushinandturnthe surfaceburner __/_
control k nobto the LITE position.
IMPORTANT: Only light one
If theappliancehasnotbeenoperatedfora periodoftime,
surfaceburnerat a time.
the surface burnermay bedifficulttolightdue to airin the gas
line.Tobleedoff airfrom the line, holda lightedmatchnextto
3. Immediately,rotatethe TopBurner
the burner and turn the surface burner control knob to the
Ignitor knob to the right (clockwise)
ON position.When the burner lights, turn the knob back to
severalclicks untilthe burner lights.
the OFF position and proceedas directed below.
The burner should light within 6
clicks or one full rotation of the
Topreventdamageto the cooktopor pan,neveroperate the
knob.
surface burner withouta pan in place, never allow a pan to
boil dry, and never operate a surface burner on HIGH for
4. When the burner lights, adjust the surface burner
extendedperiods of time.
control knob between OFF and HI to select the desired
flame size.
CAUTION: If the burner does not light within about 4
5. After cooking,turn the surface burner control knob to the
secondsor ffthe flameshouldgoout during cooking,turn
OFF position.
the burner off. If gas hasaccumulated and a strong gas
odor is detected,open a window and wait 5 minutesfor
To operate burner if the Piezo ignitor is not functionah
the gas odor to disappearbefore relightingthe burner.
1. Be sureall controlsare in the OFF position.
2. Hold a lighted matchto the desired surface burner head.
To lightsurface burner with matchlit Ignition:
1. Place a panonthe burnergrate.
CAUTION: Donotturnthe control k nobonandallowgas
to escapebeforelightingthe match.
2. Hold a lighted match next to the desired surface burner
head.
3. Push in and turn the surface burner control knob to the
LITE position.
CAUTION:Do not turn the controlknob on and allow gas
4. Whenthe burnerlights,adjustthe knob betweenOFF and
to escapebefore lightingthe match.
HI to select the desiredflame size.
3. Push in and turn the surface _
5. After cooking,turn the knob to the OFF position.
burner control knob to the LITE
position.
4. When the burner lights, adjust
Whenthe recreational v ehicle isnot in useor while traveling,
the knob betweenOFF and HI to
select the desired flame size.
turn all knobs to the OFF positionand turn off the main gas
supply.
5. Aftercooking,turnthe surface burnercontrolknob tothe
OFF position.
Need help?
Do you have a question about the CLY1612BDH and is the answer not in the manual?
Questions and answers