Renkforce 1359882 Operating Instructions Manual page 92

6. Example: Deleting a transponder (if it has not been lost and is still working)
If a secondary code has been programmed for the transponder, it is not necessary to
delete the transponder.
You also do not need to enter a user code.
(Reading transponder)
(a) (b)
(a) Transponder belongs to output #1
(b) Delete transponder
(c) Hold transponder in front of the sensor surface (distance < 2 cm)
(d) Perform deletion (code lock emits two beeps)
(Reading transponder)
(a) (b)
(a) Transponder belongs to output #2
(b) Delete transponder
(c) Hold transponder in front of the sensor surface (distance < 2 cm)
(d) Perform deletion (code lock emits two beeps)
92
(c) (d)
(c) (d)