Cisco Huu Upgrade From 1.5(4) To 2.0(3I) - Cisco UCS Invicta C3124SA Upgrade Procedure

Hide thumbs Also See for UCS Invicta C3124SA:
Table of Contents

Advertisement

Cisco Host Upgrade Utility (HUU) 2.0(3i) addresses a memory leak issue where the user was unable to
access Cisco IMC using SSH or HTTP. However, pinging Cisco IMC was successful.
Download HUU 2.0(3i):
https://software.cisco.com/download/release.html?mdfid=284296254&flowid=31743&softwareid=283
850974&release=2.0%283i%29&relind=AVAILABLE&rellifecycle=&reltype=latest
User guide for HUU upgrade:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/lomug/2-0-x/b_huu_2_0_3/b_huu_
2_0_3_chapter_011.html

Cisco HUU Upgrade from 1.5(4) to 2.0(3i)

Version 2.0(3i) has been tested and is supported.
Note
There may be issues using some versions of Java.
Note
Log into CIMC and check the version.
Step 1
Figure 1
After logging in, check the BIOS version.
Step 2
Check the health of the storage RAID device using the Cisco UCS Invicta C3124SA Appliance GUI
to ensure that there are no degraded RAID devices. If the storage RAID is degraded, contact Cisco
TAC.
Ensure that there are no scheduled snapshots.
Be aware that a reboot of the Cisco UCS Invicta C3124SA Appliance is required after each upgrade
is completed.
The following Java versions have been tested:
Version 7 Update 55 (build 1.7.0_55-b13)
Version 7 Update 67 (build 1.7.0_67-b01)
Set the security level to Medium in the Java Control panel.
Clear you browser cache and the Java cache if a problem occurs.
Cisco Integrated Management Controller Version Screen
Cisco UCS Invicta C3124SA Appliance Upgrade Procedure Guide
Cisco HUU Upgrade from 1.5(4) to 2.0(3i)
3

Advertisement

Table of Contents
loading

Table of Contents