Putting Your Water Computer Out Of Operation - Gardena SelectControl 1885 Operating Instructions Manual

1885-20.960.01_11.11.2013_GARDENA.QXP 13.11.2013 10:37 Seite 129
Deactivate
watering program :

6. Putting your Water Computer out of Operation

Storage /
Overwintering :
Disposal :
(in accordance with
RL 2002 / 96 / EC)
The watering program is not executed when the knob is set to
Off. The programmes remain stored. A program-controlled open
valve can also be closed early without changing the program
data (watering start time, watering duration, watering cycle).
v Turn the rotary knob to Off.
The watering program is deactivated.
To reactivate the watering program turn the rotary knob
to Prog.
1. To preserve the battery, it should be removed
(see 4. Putting Your Water Computer into Operation).
When the battery is inserted again in spring, the modified
programs remain saved and do not have to be re-entered.
2. Store controller and valve unit in a dry place where they are
protected from frost.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important : Make sure that the unit is disposed of via your
municipal recycling collection centre.
129