Tripp Lite SNMPWEBCARD Installation Manual page 9

Installation
1. From the initial PowerAlert Status page, click the Settings button
top of the screen, then click the Events button
side of the screen.
2. From the Event Settings page, confirm that the Low Battery
Shutdown
click the checked box to access the Setting Details page.
3. From the Details page
Settings drop down menu
B E
Attach Faceplate: Using one hand to hold the card in place, temporarily
4-3
detach the network cable. Align and attach the faceplate that matches your
UPS system, using screws from the accessory slot cover. Reattach the
network cable.
Note for Network Management System Users Only: Two MIB files -
Tripplite.mib and RFC1628.mib - must be loaded on each Network
Management Station that will monitor the UPS system via SNMP. The files
are provided on the CD-ROM included in the product package.
200907010 93-2916.indb 9
box is checked and then click the Details Tab
D
, choose your preferred settings from the
F
and click the Save Changes button
G
A C D
that appears at the left
B
9
at the
A
and
C
, or double-
E
.
H
G H F
10/8/2009 5:16:39 PM