Snmp Settings - Tripp Lite SNMPWEBCARD Installation Manual

Installation
Follow the sequence of responses below in order to assign an IP address to
the card. The default terminal mode password is TrippLite. Sample IP
settings are shown - supply your own IP information when you configure
your card.
This card's hostname [ ]?
This card's domain [ ]?
Obtain IP settings automatically using DHCP for Ethernet interface? [Y]
IP address?
Subnet mask?
Gateway address?
DNS server 1?
DNS server 2?
This cards host name? [cornflakes]
This cards domain? [tlsoftwaredev.local]

SNMP Settings

Enable SNMP Community 0 [Y]? y
Choose a community privilege level:
Privilege Level [4]:
Community Name [tripplite]:
Allowable Address Range : [0.0.0.0]?
Allowable Address Mask : [0.0.0.0]?
Enable SNMP Community 1 [N]? n
Enable SNMP Community 2 [N]? n
Enable SNMP Community 3 [N]? n
Note: Default SNMP access is:
Community 0 enable with v2 read only community public
Community 1 enable with v2 read/write community tripplite
200907010 93-2916.indb 6
[10.2.0.98]
[255.0.0.0]
[10.0.0.1]
[10.0.0.5]
[10.2.0.10]
0 - noAccess
1 - v1UserReadOnly
2 - v1UserReadWrite
3 - v2cUserReadOnly
4 - v2cUserReadWrite
6
10/8/2009 5:16:38 PM