Advertisement
Function
Types
Ordering
Example
Compatibility
2/10
Building Technologies
The HTC3.2 room operator unit communicates with the HRC3.1 or HRC3.2 room
controller via a serial port, performing the following functions:
• Displays the room temperature setpoint
• Transmits the manual room temperature setpoint adjustment
• Displays the manual room temperature setpoint adjustment
• Transmits the manually set fan speed
• Displays the manual or automatic fan speed
• Transmits the "Auto" operating mode signal for automatic selection of the fan speed
• Measures and transmits the room temperature detected via the built-in 10 kΩ NTC
room sensor or via an externally connected NTC 10 kΩ room sensor
Room operator unit for Bticino Living cover plate range
HTC3.2/BB
Room operator unit for Bticino Light cover plate range
HTC3.2/BW
Room operator unit for Vimar Idea cover plate range
HTC3.2/VB
Room operator unit for Vimar Plana or Ikon cover plate range
HTC3.2/VW
When ordering, please specify the quantity, product name and type code:
30
Ro
om units
The following items depend on the desired overall program and installation type and
must be ordered separately from the corresponding frame supplier:
• Flush-mounted or cavity wall box for integration.
• Cover frame of the corresponding supplier with desired surface.
Name
Room controller
Room controller
Room operator unit on same room bus
Cable temperature sensor
Room temperature sensor in VIMAR idea housing
Magnetic card reader on same room bus
Magnetic card holder on same room bus
Transponder card reader on same room bus
Transponder card holder on same room bus
Chip card reader on same room bus
Chip card holder on same room bus
HTC3.2/.. - Room operator unit
HTC3.2/BB
Type
HRC3.1
HRC3.2
HTC3.2/..
HSE1.1
HSE1.2
HMR3.1/A
HMH3.1/A
HML3.1/A
HTR3.1/B
HTH3.1/B
HCR3.2/..
HCH3.2/..
Data sheet
N6313
N6314
N6320
N6221
N6221
N6334
N6335
N6336
N6337
N6332
N6333
CM2N6320en
01.09.2008
Advertisement
