Engine / Efi System Support - RindaTechnologies TechMate Pro User Manual

Engine / EFI System Support

The TechMate Pro scan tool supports a wide variety of marine electronic engine
control systems. At the time of this writing the following system types are sup-
ported as summarized below.
• All marine engines equipped with GM MEFI (MEFI-1 thru MEFI-6)
(
Depending upon the model year these engines include MerCruiser, Volvo Penta, Indmar,
Pleasurecraft, Crusader, Marine Power, Kodiak, Flagship Marine and others.)
• Volvo Penta engines equipped with EGC EFI
• Pleasurecraft / Crusader engines with ECM-07 & ECM-08 EFI
• Indmar engine models equipped with GCP / Indmar EFI
• Ilmor MV8 marine engines equipped with Ilmor 4G EFI
• Ilmor MV10 marine engines (2009-Up) with Ilmor EFI
• MerCruiser engines equipped with PCM-555 and ECM-555 EFI
• MerCruiser / Mercury Racing engines equipped with PCM-09 EFI
• OBD-M compliant sterndrive / inboard gasoline marine engines.
• MerCruiser engines with Thunderbolt V Ignition
• MerCruiser 2.8L and 4.2L D-Tronic Diesel Engines
• MerCruiser 7.3L D-Tronic Diesel Engines
• Mercury 2 & 4 stroke outboards (see outboard supplement for details)
Details on engine support are covered in sections of this manual dedicated to
specific engine control system types. Please refer to the appropriate section of
this manual based on the type of engine control system being diagnosed.
Engine Support
Page 11 Page 11