Disassembly; Removal Of The; Removal Of The Ha-Board And The Hb-Board; Removal Of The Slot Block - Panasonic TH-50PHD8UK Service Manual

TH-50PHD8UK

7 Disassembly

· To Remove P.C.B. , wait for 1 minute after power was off
for discharge from electrolysis capacitors.
· and marks indicate screw positions.
7.1. Removal of the Back Cover
1. Remove the screws (×19
the Back Cover.
7.2. Removal of the HA-Board and
the HB-Board
· Removal of the HB-Board
1. Remove the 4 screws(A) of the HB Terminal Block and then
remove the HB Terminal Block.
2. Remove the 4 screws(B).
3. Remove the 2 screws(C) and then remove the HB-Board.
· Removal of the HA-Board
1. Remove the 4 screws(D) of the HA Terminal Block and then
remove the HA Terminal Block.
2. Remove the 4 screws(E).
3. Remove the 2 screws(F) and then remove the HA-Board.
, ×6 , ×4 ) and then remove
7.3.

Removal of the Slot Block

1. Disconnect the couplers(J1, J2, J3, J4, J5, J6, J7, J8, J10,
J15).
2. Remove the 4 screws and then remove the Slot Block.
7.4.

Removal of the J-Board

1. Remove the HA Terminal Block and the HB Terminal Block.
(Reference to remove of the HA-Board and remove of the
HB-Board)
2. Remove the Slot Block.
(Reference to remove of the Slot Block)
3. Remove the 8 screws and then remove the J-Board.
10