Step 4 Setting The Date And Time - Sony DCR-DVD100 DVD Handycam Technology Operating Instructions Manual

Step 4 Setting the date and time

Set the date and time when you use your camcorder for the first time. Set the
geographical area, then the daylight savings time, the year, the month, the day, the hour
and then the minute, in that order.
If you do not use your camcorder for about 3 months, the date and time settings may
be cleared from memory (bars may appear) because the built-in rechargeable battery in
your camcorder will have been discharged during that time. In that case, charge the
built-in rechargeable battery by connecting the AC adaptor, and set the date and time
again (page 16, 132).
1
Open the LCD screen while pressing OPEN.
2
Turn the power on by sliding the POWER switch upward while pressing the
green button.
The CLOCK SET display appears.
3
Select the desired geographical area with v/V, and press ENTER.
b/v/V/B/ENTER buttons
CLOCK SET
AREA 26 GMT -5.0
New Yor k,Bogota
DST OFF
DATE Y M D
:
[ ENTER ] : NEXT ITEM
CLOCK SET
AREA 26 GMT -5.0
N ew Yo r k , B o g o t a
DST OFF
ON
DATE Y M D
:
[ ENTER ] : NEXT ITEM
SETUP button
POWER switch
21