EarthQuaker Devices Ghost Echo Operation Manual

Hide thumbs Also See for Ghost Echo:

Download this manual

Enlarged version

<<< Switching >>>

This device is true bypass and uses electronic relay-based switching. Audio will not pass

without power.

<<< Power Requirements >>>

• Current Draw: 86mA

• This device take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We

always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple

isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.

Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter

dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

<<< Tech Specs >>>

• Input Impedance: 10M Ohm

<<< Warranty >>>

This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any

issues, please email info@earthquakerdevices.com.

www.earthquakerdevices.com

• Output Impedance: 1K Ohm

O P E R A T I O N M A N U A L

Page 1 This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any issues, please email info@earthquakerdevices.com. www.earthquakerdevices.com O P E R A T I O N M A N U A L ©2018 EarthQuaker Devices LLC...
Page 2 The Ghost Echo is true bypass and built one at a time by a team of friendly ghosts in the never- ending hall of funhouse mirrors that is Akron, Ohio, USA.