Table of Contents
Advertisement
External connection (M7)
N600i provides you with the functions of Bluetooth,
Synchronisation and Flash memory as an
external connection.
Bluetooth®
Using this function allows you to connect an external
Bluetooth supported device to N600i. The following
services are available:
• Dial-up connection
Connecting N600i to a PC via Bluetooth technology
enables the PC to use N600i just like a modem to
establish a dial-up connection to an Internet service
provider.
• Data transfer (Only one phonebook data is available.)
You can transfer the phonebook data to another
Bluetooth device such as PC, PDA and N600i.
• Headset/handsfree connection
You can make/receive a call using a Bluetooth headset
or handsfree kit
Data transfer is performed as follows:
• For sending data from N600i
1. Select the phonebook data to be sent on your N600i.
2. Search the available device and select the target.
3. Bluetooth connection is established
4. Data transfer starts.
• For receiving a phonebook data on N600i
1. Select Discoverable (see the next section) to set
your N600i to standby mode
2. Data is sent from the target device.
☛
7, or select
7 (External
connection) to
press the Enter
key on the Menu
To use a Bluetooth device
☛
screen.
No Bluetooth
1
2
3
4
☛
No Options
1
2
3
4
5
6
39
3. The save confirmation screen appears.
4. Press YES (SK1 key) to save the transferred data
into phonebook.
7, or select 7 (External connection) to press
the Enter key on the Menu screen, and Bluetooth to
open or close connection for the Bluetooth devices.
Discoverable Sets standby mode for connection
from an external device.
NEC
Head-
Connects or disconnects to/from NEC
set
headset. This menu appears after
registration.
My PC
Connects or disconnects to/from a
PC.
This menu appears after registration.
Handsfree
Connects or disconnects to/from a
kit
handsfree kit. This menu appears
after registration.
Press Options and the following menus are available.
Information Displays information on the selected
device.
Search
Searches for nearby Bluetooth devices
to register.
Pairing
Changes the handset status to bonding
standby
wait status in which the handset waits
for
the
authentication
devices in order to register the devices.
Terminal
Displays the Bluetooth information of
Info.
the handset. The device name can be
edited, in which case, the edited device
name is displayed at the other party's
Bluetooth device.
Remove
Deletes the registered devices from the
device
list.
Stop all
Disconnects all Bluetooth connections.
from
other
Advertisement
Table of Contents
