Table of Contents
Advertisement
Enable FTP Server
If this option is enabled, users can upload and download files via
protocol).
Allow anonymous FTP login ("guest" right)
The
server prompts for a user name and password when clients attempt to
FTP
connect. If this option is enabled, users will be able to enter "anonymous" as the
user name, and anything as the password. If this option is disabled, users must pro-
vide their correct user name and password.
Enable UPnP Support
If enabled, the
NAS
n
(e.g., Windows Me,
UP
P
generated.
Enable Print Icon
If enabled, the
NAS
log boxes.
Port Number For HTTP...
This port number is used for Web browser connections to the
default port is 80, as used by Web servers. If this is changed, use a number greater
than 1024 (8080 is often used). Also, if the port is not 80, specify the port in the
Web browser, in order to connect. To do this, add a ":" and the port number after
the address: e.g.,
http://192.168.0.100:8080
This example assumes the Device's
ber is 8080.
Restore Default Config Button
Click this button to restore all settings on the
stored on the
NAS
Chapter 3 Using the Administrative Utility
Device will broadcast its availability. On systems which support
), an icon for the
XP
Device places a printer icon for its print server in all print dia-
IP
Device will not be affected
Device will be automatically
NAS
address is 192.168.0.100, and the port num-
Device to factory defaults. Data
NAS
27
(file transfer
FTP
Device. The
NAS
Advertisement
Table of Contents
