Using the
Administrative Utility
This chapter describes using the
Utility, the administrator can check the
create user groups.
Accessing the Administrative Utility
To establish a connection from a computer to the
1. Open a Web browser.
2. In the Address text box, enter "http://" and the
using the default
☞
Note: If the port number used by the Device has been changed
(on the System screen) from the default (80), specify the correct
port number when connecting.
For example, if the current port is 8080:
3. Once connected, the following screen is displayed.
Device's Administration Utility. With the
NAS
NAS
address, enter:
IP
http://192.168.0.100
http://192.168.0.100:8080
Device's status, add or delete users, or
Device:
NAS
Device's
NAS
15
3
address. If
IP