Network Settings - ActionTec NS-100 User Manual

Delete Current Job
Clicking this button deletes the current print job and, if applicable, starts the next
print job in the print server queue.
Delete All Jobs
Clicking this button deletes all current print jobs.
Refresh
Click this button to update the data shown on the Status screen.
Details
Clicking this button will open a new screen, displaying further status details,
including a list of all computers and other devices allocated an
Device function (if enabled).
DHCP

Network Settings

This screen allows the modification of the
M
Warning: Actiontec recommends leaving these values at their
default settings. Only experienced network administrators
should modify any of the setting in this screen.
Chapter 3 Using the Administrative Utility
Devices network settings.
NAS
21
address by the
IP