Sony CCD-TRV65 Operating Instructions (primary manual) Operating Instructions Manual page 33

Changing the mode settings
Items for VTR/PLAYER mode only
HiFi SOUND <STEREO/1/2> (CCD-TRV65/TRV615 only)
•Normally select STEREO.
•Select 1 or 2 to play back a dual sound track tape.
/ EDIT <ON/OFF>
•Select ON to minimize picture deterioration when editing.
•Normally select OFF.
TBC* <ON/OFF> (CCD-TRV65/TRV615 only)
•Normally select ON, to correct for jitter.
•Select OFF to not correct for jitter. The picture may not be steady when played back.
Note on TBC setting
Set TBC to OFF when:
•Playing back a tape you have dubbed over.
•Playing back a tape on which you recorded the signal of a TV game or similar
machine.
•The playback picture fluctuates.
DNR* <ON/OFF> (CCD-TRV65/TRV615 only)
•Normally select ON to reduce picture noise.
•Select OFF if the picture has a lot of movement, causing a conspicuous afterimage.
The following settings work only during playback
EDIT, HiFi SOUND, TBC, and DNR.
* These settings are retained even when the battery is removed, as long as the lithium
battery is in place.
33