Smartpilot X-Series Specifications - Raymarine SmartPilot X-Series Setup Manual

SmartPilot X-Series Specifications

Nominal supply voltage
X-10
X-30
X-SOLENOID
X-CAN
Operating voltage range
Power consumption (standby)
(all types)
Gyro
Environmental conditions
operating temperature
non-operating temperature
relative humidity limit
water protection
Storage conditions when
packed
temperature range
relative humidity limit
Dimensions
Weight
(all types)
Inputs
All types
X-10, X 30 & X-SOLENOID
only
Outputs
X-10, X -30
X-SOLENOID
X-CAN
Steering drive compatibility
X 10
X 30
X-SOLENOID
X-CAN
Drive motor output
X-10
X-30
12 or 24 V DC (fuse protected at 15A)
12 or 24 V DC (fuse protected at 40A)
12 or 24 V DC (fuse protected at 15A)
12 or 24 V DC (fuse protected at 10A)
10 V to 32 V DC
300 mA
internal GyroPlus fitted onto circuit board as standard
-10°C to 55°C (14°F to 131°F)
-20°C to 70°C (-4°F to 158°F)
80%
drip resistant when mounted vertically
-5°C to 50°C (23°F to 122°F)
75%
(width, height, depth)
307mm (12.1 in), 195 mm (7.7 in), 70 mm (2.8 in)
2.2 kg (4.85 lbs)
Fluxgate compass, NMEA 0183 v2.3, SeaTalk, SeaTalk
sleep switch.
Rudder position sensor,
NMEA 0183 v2.3, SeaTalk, SeaTalk
NMEA 0183 v2.3, SeaTalk, SeaTalk
NMEA 0183 v2.3, SeaTalk, SeaTalk
All Type 1 drives/pumps (excluding CR pumps) (drive voltage must
match boat's supply voltage)
All Type 1, Type 2 and Type 3 drives / pumps (drive voltage must
match boat's supply voltage)
CR pumps etc.
Volvo Penta IPS system.
continuous 10A at supply voltage
continuous 30A at supply voltage
ng
, power,
ng
, drive motor, drive clutch
ng
, bypass valve, solenoid drive
ng
, CAN (IPS)
37