Midas M32R User Manual page 55

Digital rack mixer. digital console for live and studio with 40 input channels, 16 midas pro microphone preamplifiers and 25 mix buses
Hide thumbs Also See for M32R:
Table of Contents

Advertisement

55
DIGITAL RACK MIXER M32R User Manual
MIDI CC (raw) selected and Remote is enabled+active, the group section controls
will transmit/receive the following messages:
MIDI RX
Group 1-8 SELECT
Group 1-8 SOLO
Group 1-8 MUTE
Sends On Fader
Group DCA 1-8
BUS 1-8
BUS 9-16
MTX 1-6
GROUP Faders
HUI selected and Remote is enabled+active, then the group fader section and
buttons will emulate the HUI control surface protocol, i.e. for ProTools.
SELECT/SOLO 1-8 buttons will select or solo the corresponding track in the DAW,
in banks of eight tracks
Sends On Fader = enables touch-writing a fader automation on selected track,
track automation mode in DAW must be 'touch' , (latching)
Use the layer buttons to determine the function assigned to
the MUTE 1-8 buttons, the LED displays indicate that function.
Group DCA 1-8 = allows movement of the bank selection of tracks
in a DAW, (push non-latching)
BUS 1-8 = allows the setting of DAW tracks to 'Record Ready' ,
(push non-latching)
BUS 9-16 = enables use of MUTE buttons for track mute in
the DAW, (latching)
MTX 1-6 = enables use of MUTE buttons for transport controls in
the DAW, (latching).
MACKIE CTRL selected and Remote is enabled+active, then the group fader
section and buttons will emulate the Mackie Control Universal protocol
SELECT/SOLO 1-8 buttons will select or solo the corresponding track in the DAW,
in banks of eight tracks
Sends On Fader = enables touch-writing a fader automation on selected track,
track automation mode in DAW must be 'touch' or 'latch' , (latching)
Use the layer buttons to determine the function assigned to the
MUTE 1-8 buttons, the LED displays indicate that function.
Group DCA 1-8 = allows movement of the bank selection of tracks in a
DAW, (push non-latching)
BUS 1-8 = allows the setting of DAW tracks to 'Record Ready' ,
(push non-latching)
BUS 9-16 = enables use of the MUTE buttons for track mute in
the DAW, (latching)
MTX 1-6 = enables use of the MUTE buttons for transport controls in
the DAW, (latching).
MIDI Ch
Controller
1
Note 64-71
1
CC 32-39
1
CC 40-47
1
CC 48
1
Note 72
1
Note 73
1
Note 74
1
Note 75
1
CC0-7
Comment
on (127) / off (0), push non-latching
on (127) / off (0), toggle latching
on (127) / off (0), toggle latching
on (127) / off (0), toggle latching
on (127) / off (0), push non-latching
on (127) / off (0), push non-latching
on (127) / off (0), push non-latching
on (127) / off (0), push non-latching
0-127

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents