Midas M32R User Manual page 54

54
DIGITAL RACK MIXER M32R User Manual
Permanent MIDI Assignments Overview (Remote Off)
MIDI RX MIDI Ch
Scenes 1
Snippet 2
Cue 3-6
Mute Groups 2
Faders 1
Mute 2
Pan 2
MIDI TX MIDI Ch
Mute Groups 2
Faders 1
Mute 2
Pan 3
MIDI RX > Assign
Whenever assignable controls are set up for transmitting MIDI commands,
reception of that same command (status or continuous) will be reflected on the
respective assignable control element (button light, encoder LED collar).
MIDI TX > Assign
The assignable MIDI commands have been restricted to some generic elements:
Encoders 1-4 > can be assigned to sending control changes, program changes
or notes.
• Parameters are currently 'Channel' and 'Value'
• For CC and Note commands 'Value' = controller number/note
number, and the encoder rotation determines the controller value/
note-on velocity
• For Program Changes only the channel is specified, and the encoder
rotation determines the program number
Buttons 5-12 > can be operated in two modes, 'MIDI Push' (non-latching) for
momentary commands, or 'MIDI Toggle' (latching) for static commands.
MIDI Push
Can be assigned to sending control changes, program changes or notes
Parameters are currently 'Channel' and 'Value'
For CC and Note commands 'Value' 0...127 = controller number/note number,
and the button momentarily toggles the controller value/note-on velocity
To 127 (depressed/released]
For Program Changes 'Value' 0...127 = program/preset number, that will be sent
upon pressing the button.
Controller Value
Program Change 1-100
Program Change 1-100
Program Change 0-127
CC80-85 on (127) / off (0), toggle latching
CC0-79 0-127
CC0-79 on (127) / off (0), toggle latching
CC0-79 0-127
Controller Value
CC80-85 on (127) / off (0), toggle latching
CC80-79 0-127
CC80-79 on (127) / off (0), toggle latching
CC80-79 0-127
Comment
Ch3 -> Cue 1-127, Ch4 -> Cue 128-255, etc.
Value 95 = 0dB
Value 64 = Pan Mid
Comment
Value 95 = 0dB
Value 64 = Pan Mid
MIDI Toggle
Can be assigned to sending control changes or notes
Parameters are currently 'Channel' and 'Value'
For CC and Note commands 'Value' 0...127 = controller number/note number,
and the button toggles the controller value/note-on velocity
Between value/velocity 127 and 0 with every operation.
PLEASE NOTE:
The ASSIGN section also reflects/displays reception of the same MIDI commands
that are selected for transmission
The MIDI commands assigned to the ASSIGN controls can be transferred to and
from stage via AES50 using the S16 stage box MIDI I/O.
MIDI RX/TX > Remote
Enables a specific form of bi-directional MIDI communication for remote
controlling a computer DAW application using control elements of the
M32 console. REMOTE can be used in three modes, Mackie Control, HUI and
raw MIDI CC (raw) controllers (see SETUP / remote)