Sony Handycam Vision CCD-TRV107E Operating Instructions Manual page 90

Types of trouble and their solutions
Symptom
A vertical band appears when you
shoot a very bright subject.
An unknown picture is displayed on
the screen.
The picture is recorded in incorrect or
unnatural colours.
The picture appears too bright, and
the subject does not appear on the
screen.
A horizontal black band appears
when shooting a TV screen or
computer screen.*
* CCD-TRV408E only
In the playback mode
Symptom
The tape does not move when a
video control button is pressed.
The playback button does not work.
The playback picture is not clear or
does not appear.
No sound or only a low sound is
heard when playing back a tape.
90
Cause and/or Corrective Actions
• This is not a malfunction.
• If 10 minutes elapse after you set the POWER switch to
CAMERA or DEMO MODE is set to ON in the menu settings
without a cassette inserted, your camcorder automatically
starts the demonstration.
c Insert a cassette and the demonstration stops.
You can also cancel DEMO MODE. (p. 82)
• NIGHTSHOT is set to ON.
c Set it to OFF. (p. 34)
• NIGHTSHOT is set to ON in a bright place.
c Set it to OFF or use the NightShot function in a dark place.
(p. 34)
• The backlight function is working.
c Cancel it. (p. 33)
• Set STEADYSHOT to OFF in the menu setting. (P. 79)
Cause and/or Corrective Actions
• The POWER switch is set to CAMERA or OFF (CHG).
c Set it to PLAYER. (p. 38)
• The tape has run out.
c Rewind the tape. (p. 38)
• The television's video programme position is not adjusted
correctly.
c Adjust it. (p. 42)
• EDIT is set to ON in the menu settings.
c Set it to OFF. (p. 80)
• The video head may be dirty.
c Clean the heads using the Sony V8-25CLD cleaning cassette
(optional). (p. 109)
• The volume is turned to minimum.
c Open the LCD panel and press VOLUME +. (p. 38)