Remove The Sc-Board; Remove The Ss-Board; Remove The Stand Brackets - Panasonic TH-50PZ750U Service Manual

6.14. Remove the SC-Board

1. Unlock the cable clampers to free the cable.
2. Remove the SU-Board and SD-Board. (See section 6.12.
and 6.13.)
3. Unlock the cable clampers to free the cable.
4. Disconnect the connectors (SC2, SC20 and SC23).
5. Remove the screws (×9

6.15. Remove the SS-Board

1. Disconnect the connectors (SS11, SS12, SS35, SS42 and
SS44).
2. Remove a short-jumper connector SS34 and re-use for new
SS-Board.
3. Disconnect the flexible cables (SS51, SS52, SS53, SS54,
SS55 and SS56).
4. Remove the screws (×7
) and remove the SC-Board.
) and remove the SS-Board.

6.16. Remove the stand brackets

1. Remove the plasma panel section from the servicing stand
and lay on a flat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×5
each) and remove the stand brackets (left, right).
15
TH-50PZ750U