Advertisement
25.
Carefully flip completed Rafter Section over so the 3 1/2" wide Soffit is facing the front and place onto
walls. Note: once again, make sure 3 1/2" wide Soffit is positioned to the front of the shed.
26.
Position completed Rafter Section on top of walls. Outside Rafters will sit on Extension Wall framing
and be positioned equally from side to side.
27.
When Rafter Section is positioned correctly, both Front and Rear Soffits will sit approximately 1/8"
away from wall siding. This can vary slightly.
1-888-658-1658
3 1/2" Wide Soffit
to the front.
www.outdoorlivingtoday.com
Page 17
Rafter sits on framing
sales@outdoorlivingtoday.com
Advertisement
