Advertisement
7.
Automatically prompt interface
Error Code Display
Error Code
Motor position sensor fault!
THROTTLE fault!
Motor or controller short circuit fault!
The fault is excluded and the fault code display interface is automatically exited.
General Project Setting
1. Set maximum riding speed
After power on for 5 seconds, hold
time, maximum riding speed Km/H and MXS flash, hold
shortly to set the maximum riding speed (default 25Km/H). Hold
button shortly and go to the next parameter settings.
2. Wheel diameter setting
The wheel diameter will be set after finishing setting the
maximum riding speed, wheel diameter specifications flashes.
Hold
diameter. Select the range
6,8,10,12,14,16,18,20,22,24,26,700c,28and 29 inches.Hold
button shortly and go to the next parameter settings.
2.
Set the metric units
The metric units will be set after finishing setting wheel
diameter, Km/H and Km flash. Hold
select the three metric units of speed, mileage, and ambient
temperature in synchronization.
Display
Riding speed
Total distance
Environment temperature
4. Km/H and Km stop flash after metric unit setting is completed. Hold
to re-enter the maximum riding speed setting interface; or hold
setting environment of routine projects and save the setting values, returning to display 1.
Definition
Motor Hall Signal Abnormality
Throttle Abnormality
Motor or controller has short circuit
Abnormality
and
at the same
or
or
shortly to set the specifications of wheel
or
shortly and
Metric
Km/H
Km
℃
Temperature
button shortly again
button long to exit from
5. Exit from routine project setting
All three routine project settings can exit from the setting environment and return to the
display
if hold
button long after each setting is completed, meanwhile the setting values are saved.
Under each setting interface, if the button failed holding for more than 1 minute, it will
automatically return to display 1, and the setting value is invalid.
Outline Drawings and Dimensions
1.Dimensions of main instrument body
3.Dimensions of button box
2.Mounting dimensions of double brackets
4.Wiring diagram
www.greenbikekit.com
Advertisement
