Husqvarna 122HD45 Operator's Manual page 5

Hide thumbs Also See for 122HD45:
Table of Contents

Advertisement

Available languages

Available languages

Make sure the gear housing is lubricated correctly.
Refer to
To lubricate the gear housing on page 13 .
The gear housing gets hot when the product has
been in use. To avoid burning yourself do not touch
the gear housing.
All covers and guards must be fitted before starting.
The transport guard should always be fitted to the
cutting unit when the product is not in use.
Personal protective equipment
WARNING: Read the warning instructions
that follow before you use the product.
Always use approved personal protective equipment
when you use the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the right
equipment.
Use approved hearing protection that provides
adequate noise reduction. Long-term exposure to
noise can result in permanent hearing impairment.
Use approved eye protection. If you use a visor, you
must also use approved protective goggles.
Approved protective goggles must comply with the
ANSI Z87.1 standard in the USAs or EN 166 in EU
countries.
Use gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
Use sturdy non-slip boots or shoes.
994 - 001 - 25.02.2019
Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
Keep first aid equipment close at hand.
Safety devices on the product
WARNING: Read the warning instructions
that follow before you use the product.
Do not use a product with defective safety devices.
Do a check of the safety devices regularly. If the
safety devices are defective, speak to your
Husqvarna service agent.
To do a check of the throttle trigger lockout
1. Make sure that the throttle trigger lockout (A) and
throttle trigger (B) move freely and that the return
spring operates correctly.
B
A
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

122hd60

Table of Contents