ViewSonic PG701WU User Manual page 46

i. This section is only used with the Crestron Control System. Please contact
Creston or refer to its user manual for setup information.
ii. You can name the projector, keep track of its location and the person in
charge of it.
iii. You can adjust the
iv. Once set, access to the remote network operation on this projector will be
password-protected.
v. Once set, access to the tools page will be password-protected.
NOTT:
• To prevent errors, only input the English alphabet and digits on the Tools page.
• After making the adjustments, press the "Send" button and the data will be saved
for the projector.
vi. Press "Exit" to go back to the Remote Network Operation page.
Please pay attention to the limitation of input length (including space and other
punctuation keys) in the list blow:
Category Item
Crestron Control
Projector
Network Configuration
User Password
Admin Password
LAN Control Settings.
Input Length
IP Address
IP ID
Port
Projector Name
Location
Assigned To
DHCP (Enabled)
IP Address
Subnet Mask
Default Gateway
DNS Server
Enabled
New Password
Confirm
Enabled
New Password
Confirm
46
Maximum Number of
Characters
16
4
5
32
32
32
(N/A)
16
16
16
16
(N/A)
26
26
(N/A)
26
26