PRODUCT DIAGRAM MARKS Spec No. WMTS 105:2016 SAI GLOBAL 955mm WMK26317 (Lic. No.) 560mm The appliance is comply with applicable ACMA regulatory arrangements (Regulatory Compliance Mark) and WaterMark WMTS 105:2016. 330mm Note: Diagram is of Bottled Cooler TECHNICAL SPECIFICATIONS Water Reservoir Cold Housing Material Plastic with stainless steel side panels and corner peices...
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock and injury to persons or property. Read all instructions before using any appliance. Keep combustible material such as furniture, Do not use this product to dispense anything bedding, pillows, clothes and/or papers away other than water.
The installation must be in accordance with AS/NZS 3500.1 and AS/NZS 3500.2. Pipe jointing is a trade skill and Aqua Cooler recommends this process is performed by qualified personnel only. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
The unit does not dispense ambient or cold water. Damaged water dispenser. Contact Aqua Cooler service team. The water bottle cap is not attached properly Connect properly. There will be a give when the to the connector on the water cooler.
Need help?
Do you have a question about the Allure Series and is the answer not in the manual?
Questions and answers