Plasma Panel Replacement Method; Remove The Back Cover; Remove The P-Board; Remove The Pb-Board - Panasonic TH-42PV500E Service Manual

6 Plasma panel replacement method

6.1.

Remove the Back cover.

1. See Service Hint (Section 5).
6.2.

Remove the P-Board.

Caution:
To remove P.C.B., wait 1 minute after power was off for
discharge from electrolisis capacitors.
1. Disconnect the couplers (P2, P5, P9, P10, P11, P12, P23,
P25 and P30).
2. Remove the screws (×5
6.3.

Remove the PB-Board

1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (PB5, PB7, PB30, PB33 and
PB34).
3. Remove the screws (×3
metal frame.
4. Remove the screws (× 4
) and remove the P-Board.
) and remove the PB-Board
) and remove the PB-Board.
TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B
6.4.

Remove the D-Board

1. Remove the PB-Board.
2. Disconnect the couplers (D3, D5, D20 and D25) and
3. Disconnect the flexible cables (D33 and D34).
4. Remove the screws (×4
11
) and remove the D-Board.