Step 6: Preparing The Remote; Controlling Tvs With The Remote - Sony BDP-S350 Operating Instructions Manual

Step 6: Preparing the
Remote
You can control the player using the supplied
remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries
to the markings inside the battery
compartment. When using the remote, point
it at the remote sensor
(page 10).
b
• Use the batteries correctly to avoid possible
leakage and corrosion. Should leakage occur, do
not touch the liquid with bare hands. Observe the
following:
– Do not use a new battery with an old battery, or
batteries of different manufacturers.
– Do not attempt to recharge the batteries.
– If you do not intend to use the remote for an
extended period of time, remove the batteries.
– If battery leakage occurs, wipe out any liquid
inside the battery compartment, and insert new
batteries.
• Do not expose the remote sensor (marked
the front panel) to strong light, such as direct
sunlight or a lighting apparatus. The player may
not respond to the remote.
26
on the player
on
Controlling TVs with the
remote
You can control the volume, input source,
channel, and power switch of your Sony TV
with the supplied remote.
b
When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.
Number
buttons
MUTING
VOL +/–
Available buttons
Depending on the connected unit, you may
not be able to control your TV with some or
all of the buttons (TV [/1, CH +/–, VOL +/–,
MUTING, or number buttons).
Buttons Operations
TV [/1 Turns your TV on or off.
VOL (volume) Adjusts the volume of
+/–
your TV.
CH (channel)
Selects the channel on
+/–
your TV.
INPUT Switches your TV's input
(input select) source between the TV
and other input sources.
MUTING Mutes the sound.
TV [/1
INPUT
CH +/–